Il volume di ossigeno da scegliere dipende dal salto di livelli richiesto e dallo stato della fibra: 10 volumi per depositare colore senza schiarire, 20 volumi per 1-2 livelli, 30 volumi per 2-3 livelli, 40 volumi solo su fibra sana e per schiariture importanti.
Il volume di ossigeno determina quanto ossigeno viene rilasciato per attivare il decolorante o la tinta, e quindi quanto in profondità agisce sulla melanina. Scegliere sempre il volume più alto disponibile, pensando di "velocizzare" il lavoro, è uno degli errori più comuni e più dannosi in colorimetria: un volume eccessivo rispetto alla fibra reale non produce un risultato migliore, produce solo più danno strutturale per lo stesso obiettivo.
Su capelli già fragili, porosi o precedentemente trattati, conviene sempre scegliere il volume immediatamente inferiore rispetto a quello teorico, anche se questo significa procedere in più passaggi.
"Il volume più alto non fa un colorista migliore. Fa solo un rischio più alto."
Cliente con capello fine e già schiarito in precedenza, che chiede di "alzare ancora un po' il biondo" con lo stesso volume 40 usato l'ultima volta da un'altra collega. La fibra, essendo già stata trattata e più fine della media, non ha lo stesso margine di sicurezza di un capello vergine: applicare di nuovo un 40 volumi avrebbe probabilmente causato rottura visibile lungo la lunghezza. La scelta corretta è stata scendere a un 20 volumi, accettando un risultato più graduale ma proteggendo l'integrità della fibra.
Scegliere il volume giusto in base a fibra e obiettivo riduce enormemente il rischio, ma non lo elimina del tutto: due capelli con la stessa porosità dichiarata possono reagire in modo leggermente diverso allo stesso volume, per ragioni che restano invisibili prima del trattamento. Anche seguendo ogni passaggio correttamente il risultato resta una probabilità alta, mai una certezza al 100% — è la natura della fibra, non un limite del professionista.
Il volume di ossigeno va scelto guardando la fibra che si ha davanti, non l'obiettivo isolato dal contesto. Il colorista che indovina rischia. Chi diagnostica, decide — anche quando la decisione è "meno volume, più sedute".
Vuoi una risposta calcolata sul tuo caso specifico, non generica? Lascia la tua email e ricevi le 5 domande gratis.
Controlla la tua email per confermare l'iscrizione e ricevere il PDF.
Volumul de oxigen de ales depinde de saltul de niveluri cerut și de starea fibrei: 10 volume pentru a depune culoare fără a deschide, 20 volume pentru 1-2 niveluri, 30 volume pentru 2-3 niveluri, 40 volume doar pe fibră sănătoasă și pentru deschideri importante.
Volumul de oxigen determină cât oxigen se eliberează pentru a activa decolorantul sau vopseaua, și deci cât de în profunzime acționează asupra melaninei. A alege mereu volumul cel mai mare disponibil, crezând că „grăbești” lucrarea, e una dintre cele mai frecvente și mai dăunătoare greșeli din colorimetrie: un volum excesiv față de fibra reală nu produce un rezultat mai bun, produce doar mai multă deteriorare structurală pentru același obiectiv.
Pe păr deja fragil, poros sau tratat anterior, e mereu de preferat volumul imediat inferior față de cel teoretic, chiar dacă asta înseamnă a proceda în mai multe etape.
„Volumul mai mare nu face un colorist mai bun. Face doar un risc mai mare.”
Clientă cu păr fin și deja deschis anterior, care cere să „mai ridice puțin blondul” cu același volum 40 folosit ultima dată de o altă colegă. Fibra, fiind deja tratată și mai fină decât media, nu are aceeași marjă de siguranță ca un păr virgin: aplicarea din nou a unui volum 40 ar fi cauzat probabil rupere vizibilă de-a lungul lungimii. Alegerea corectă a fost coborârea la un volum 20, acceptând un rezultat mai gradual, dar protejând integritatea fibrei.
A alege volumul potrivit în funcție de fibră și obiectiv reduce enorm riscul, dar nu-l elimină complet: două fire cu aceeași porozitate declarată pot reacționa ușor diferit la același volum, din motive care rămân invizibile înainte de tratament. Chiar urmând fiecare pas corect, rezultatul rămâne o probabilitate mare, niciodată o certitudine de 100% — e natura fibrei, nu o limită a profesionistului.
Volumul de oxigen se alege privind fibra pe care o ai în față, nu obiectivul izolat de context. Coloristul care ghicește riscă. Cine diagnostichează, decide — chiar și când decizia e „mai puțin volum, mai multe ședințe”.
Vrei un răspuns calculat pe cazul tău specific, nu unul generic? Lasă-ți emailul și primești cele 5 întrebări gratuit.
Verifică-ți emailul pentru a confirma abonarea și a primi PDF-ul.
The developer volume to choose depends on the level jump required and the state of the fiber: 10 volume to deposit color without lifting, 20 volume for 1-2 levels, 30 volume for 2-3 levels, 40 volume only on healthy hair and for significant lifting.
The developer volume determines how much oxygen is released to activate the lightener or the color, and therefore how deeply it acts on the melanin. Always reaching for the highest volume available, thinking you'll "speed up" the work, is one of the most common and most damaging mistakes in colorimetry: a volume too high for the real fiber does not produce a better result, it only produces more structural damage for the same goal.
On hair that is already fragile, porous or previously treated, it's always best to choose the volume just below the theoretical one, even if that means working in several steps.
"The highest volume doesn't make a better colorist. It only makes a higher risk."
A client with fine, previously-lightened hair, asking to "bring the blonde up a bit more" with the same 40 volume another colleague used last time. The fiber, having already been treated and being finer than average, does not have the same safety margin as virgin hair: applying 40 volume again would likely have caused visible breakage along the length. The correct choice was to drop to 20 volume, accepting a more gradual result but protecting the integrity of the fiber.
Choosing the right volume for the fiber and the goal reduces the risk enormously, but does not eliminate it entirely: two hairs with the same stated porosity can react slightly differently to the same volume, for reasons that stay invisible before treatment. Even following every step correctly, the result stays a high probability, never a 100% certainty — it's the nature of the fiber, not a limit of the professional.
The developer volume should be chosen by looking at the fiber in front of you, not the goal isolated from its context. The colorist who guesses takes a risk. The one who diagnoses, decides — even when the decision is "less volume, more sessions".
Want an answer calculated for your specific case, not a generic one? Leave your email and get the 5 questions free.
Check your email to confirm your subscription and receive the PDF.